Ingrese una palabra o frase en cualquier idioma 👆
Idioma:
Traducción y análisis de palabras por inteligencia artificial ChatGPT
En esta página puede obtener un análisis detallado de una palabra o frase, producido utilizando la mejor tecnología de inteligencia artificial hasta la fecha:
- cómo se usa la palabra
- frecuencia de uso
- se utiliza con más frecuencia en el habla oral o escrita
- opciones de traducción
- ejemplos de uso (varias frases con traducción)
- etimología
Qué (quién) es change pole controller - definición
Full State Feedback; State feedback controller; Pole placement technique; Pole placement; Pole-placement
disk controller
CONTROLLER FOR DISK STORAGE, USUALLY INTEGRATED INTO THE DRIVE
Hard disk controller; Hard drive controller; HD controller; Drive controller
<hardware, storage> (Or "hard disk controller", HDC) The
circuit which allows the CPU to communicate with a {hard
disk}, floppy disk or other kind of disk drive.
The most common disk controllers in use are IDE and SCSI
controllers. Most home personal computers use IDE
controllers. High end PCs, workstations and network {file
servers} mostly have SCSI adaptors.
(1998-03-16)
Disk controller
CONTROLLER FOR DISK STORAGE, USUALLY INTEGRATED INTO THE DRIVE
Hard disk controller; Hard drive controller; HD controller; Drive controller
The disk controller is the controller circuit which enables the CPU to communicate with a hard disk, floppy disk or other kind of disk drive. It also provides an interface between the disk drive and the bus connecting it to the rest of the system.
Irrigation controller
DEVICE OPERATING AUTOMATIC IRRIGATION SYSTEMS
Controller (irrigation)
An irrigation controller is a device to operate automatic irrigation systems such as lawn sprinklers and drip irrigation systems. Most controllers have a means of setting the frequency of irrigation, the start time, and the duration of watering.
Wikipedia
Full state feedback
Full state feedback (FSF), or pole placement, is a method employed in feedback control system theory to place the closed-loop poles of a plant in pre-determined locations in the s-plane. Placing poles is desirable because the location of the poles corresponds directly to the eigenvalues of the system, which control the characteristics of the response of the system. The system must be considered controllable in order to implement this method.
